TANDON AIR HEAVY DUTY TANK

TANDON AIR HEAVYDUTY TANK KUAT , KOKOH DAN TAHAN LAMA

Tandon atau Tangki HeavyDuty Penguin dengan didesain khusus untuk memberikan proteksi yang lebih maksimal. TANDON atau TANGKI HEAVYDUTY PENGUIN telah dipercayai masyarakat indonesia, kualitas dan mutunya yang tidak mengenal kompromi, tandon atau tangki heavyduty penguin telah hadir dengan berbagai warna serta ukuran dan kapasitas yang beragam, Tandon atau Tangki HeavyDuty Penguin banyak digunakan untuk penyimpanan bahan cair untuk keperluan rumah tangga, apartement , komersil dan industri. TANGKI HEAVYDUTY PENGUIN telah memenuhi SNI,  yang telah melewati proses quality control dan pengetesanlaboratorium sesuai standart SNI, itulah sebabnya Tangki HeavyDuty Penguin mnjadi produsen tangki air nomer 1 di indonesia.

Pilihan Warna Tangki HeavyDuty Penguin

Oranye	Kuning	Hijau	Biru Muda	Biru Tua	Hitam	Natural	Krem	Sand Stone

Detail Produk Tangki HeavyDuty Penguin 

• Tangki HeavyDuty Penguin dengan Lapisan dinding yang lebih tebal
• Tangki HeavyDuty Penguin memiliki tulangan dan kaki-kaki yang berfungsi memperkuat struktur tangki
• Tangki HeavyDuty Penguin juga dapat dipendam dan diletakkan di atas tanah
• Tangki HeavyDuty Penguin mampu bertahan terhadap benturan maupun tekanan pada saat dipendam.
• Tangki HeavyDuty Penguin kuat dan tidak mudah pecah atau bocor
• Tangki HeavyDuty Penguin bisa bertahan terhadap cuaca dan iklim Indonesia yang ekstrim sekalipun.
• Tangki HeavyDuty Penguin telah terbukti melewati pengujian laboratorium sesuai metode SNI dan ASTM D.

---

Untuk Info Lengkapnya dan pemesasanan silakan hubungi call centar Distributor bahan bangunan sidoarjo :

ATAP MULFORD XRP

ATAP MULFORD XRP | TRANSLUCENT ROOF adalah atap fiber yang diproduksi dengan mesing sehingga kualitas jauh lebih baik dibandingkan atap fiber lokal

Atap Mulford Xrp | Translucent Roof adalah atao translucent cahaya yang digunakan sebagai sky-light arau penerangan pada sebuah bangunan.banyak ditemukan kelemahan – kelemahan jika menggunakan arap fiber biasa. kedia permukaan ( atas dan bawah) atap mulford xrp | transculent roof dilapisi dengan film yang mencegah keluarnya serabut fiber dikemudian hari yang sering terjadi pada atap fiber lokal.

BROSUR MULFORD XRP AtapTranslucent

ATAP LUXXLITE

ATAP LUXXLITE | ATAP POLYCARBONATE 

Atap Luxxlite adalah Atap Polycarbonate yang bisa dipesan sesuai dengan atap yang ada di pasaran SEPERTI model atap zincalume type SPANDEK, TRIMDECK, FUMIRA, ALSPAN, ASBES, MAJADECK, LT 7 dll, biasanya berfungsi sebagai atap penerangan untuk Gudang dan Pabrik.

Atap Luxxlite

Atap Luxxlite

Atap Luxxlite

Atap Luxxlite

ATAP FRP DURA LITE | ATAP TRANSPARAN

PRODUCT DESCRIPTION

Atap Frp Dura Lite is a high quality Fiberglass Reinforced Plastic and guaranteed. Manufactured by auotamic and oven cured system strongly supported by Duralite Technologies Machine USA.

atap frp dura lite especially developed resistant to weathering change, UV light, chemicals corrisive vapor and corrosive environmental area.

Different to conventional fiberlass roofing, Duralite structured by two main material, Polymer especially developed for roofing sheet, with UV stabiller and E Glass grade ex USA as reinforcement layer and both on the exposed and under side protected high quality polyester film 20 micron. Choose E Grade Glass is the quality commitment, E Glass grade has a high mechanical properties and reach at least 25% glass content by weight.

dura lite adalah atap fiberglass reinforced plastic berkualitas dan bergaransi. Dibuat dengan mesin Duralite Technologies USA, otomatis dan system oven curing. Mengasilkan atap fiberglass berkualitas dan berkapasitas produksi tinggi.

Dura LITE dikembangkan secara khusus untuk tahan terhadap perubahan cuaca, sinar ultra violet dan korosi karena uap kimia di pabrik, dan lingkungan korosif lainnya. Berbeda dengan atap fiberglass konvensional pada umumnya, Duralite dibuat dengan dua komposisi material pilihan yaitu : polymer yang dikembangkan khusus hanya untuk aplikasi atap yang mengandung anti UV dan glass reinforcement E Grade Glass, ex USA dan pada kedua permukaan di lindungi dengan plastic film 20 micron berkualitas tinggi.

Mengapa atap Duralite menggunakan E Grade Glass ex USA, Karena glass tersebut sangat sempurna menyerap polymer resin, sehingga atap tidak akan keropos, serabut dan memiliki kekuatan mekanis yang tinggi.

ATAP FRP DURA LITE

PRODUCT FEATURES

Dura LITE especially developed to stand up to tough tropic area. The sheeting is made from the highest quality materials available using the worlds latest resin technology.

Dura LITE has inbuilt protection against the transmission of harmful ultra violet rays. A tough polyester film on each sheet increases its life as is prevents reinforcing glass becoming exposed on the surface of the sheet. Available in a wide range of profiles, weights and colours, Dura LITE is the premium choice for roofing and cladding.

Dura LITE dikembangkan dan di sesuaikan untuk aplikasi lingkungan tropis. Dibuat dari material berkualitas tinggi yang sesuai dan dengan menggunakan resin berteknologi terkini.Dura LITE mengandung bahan untuk melawan pancaran dan panas sinar Ultra Violet. Lapisan film di bagian sisinya akan membuat permukaan dan lapisan glass tahan pancaran sinar UV. Tersedia berbagai jenis profil, berat dan warna, Dura LITE adalah pilihan mewah untuk atap dan dinding.

PRODUCT TYPE	COLOR	LIGHT TRANSMISSION	SOLAR HEAT GRAIN
Clear Lite	Clear Transparant	89%	610 W/m2
Cool Lite	Green Transparant	80%	570 W/m2
Super Cool Lite	Milk White Transparant	62%	486 W/m2

KEY FEATURES

     Excellent long term weathering

     10 & 15 Years warranty *(term & conditions apply)

     Excellent UV protection

     Outstanding surface erosion resistance

     Superior long term clarity properties

APPLICATIONS

     Industrial and warehousing roofing

     Industrial and warehousing siding

     Building & Commercial skylight

     Nursery & green house

PRODUCT SPECIFICATIONS

Profile	Customized overlaping with metal
Length	12 meter or 11.9 (export length standard)
Product Weight Standard	1900 gsm – 2400 gsm – 3000 gsm – 4800 gsm
Nominal Thickness	1.2 mm – 1.5 mm – 2 mm – 3 mm (+15%)
Surface Protection	UV protection film
Glass Reinforcement	E glass grade
Polyester Resin	Advanced anti UV resin
Heat Distortion Temperature	200 deg C
Operating Temperature	-20 – 110 deg C
Chemical Vapor Resistant	excellent
Glass Content	at least 25% by weight
Modulus Elasticity	8.15 x 103 Mpa
Flexure Strength	103.7 Mpa
Tensile Strength	87.1 Mpa
Compressive Strength	223 Mpa
Barcol Hardness	30 shore

CORRUGATED TYPE (wide range available to special order)

Type gelombang tersedia sesuai pesanan

ATAP FRP COMPOSITE ALUM

ATAP FRP COMPOSITE ALUM | ATAP TRANSPARAN

PRODUCT DESCRIPTION

composite alum is a high quality Glass Fiber Reinforced Plastic and Manufacture guaranteed. Manufactured by an automatic and oven cured system fully supported by Duralite Technologies Machine USA.

Composite Alum especially developed resistant to weathering change, UV light, chemicals corrisive vapor and corrosive environmental area.

Different to conventional fiberglass roofing, Composite Alum Composed by two main material, Polymer especially developed for roofing sheet, with UV stabiller and E Glass grade ex USA as reinforcement layer and both on the exposed and under side protected by a high quality PE Plastic film 20 micron. Choose E Grade Glass is the quality commitment, E Glass grade has a high mechanical properties and reach at least 30% glass content by weight.

Composite Alum adalah atap fiberglass reinforced plastic berkualitas dan bergaransi. Dibuat dengan mesin Duralite Technologies USA, otomatis dan system oven curing. Menghasilkan atap fiberglass berkualitas dan berkapasitas  produksi tinggi.

Composite Alum dikembangkan secara khusus untuk tahan terhadap perubahan cuaca, sinar ultra violet dan korosi karena uap kimia di pabrik, dan lingkungan korosif lainnya.

Berbeda dengan atap fiberglass konvensional pada umumnya, Composite Alum dibuat dengan komposisi material pilihan, yaitu: polymer yang dikembangkan khusus hanya untuk aplikasi atap yang mengandung anti UV dan glass reinforcement E Grade Glass, ex USA dan pada kedua permukaan dilindungi dengan plastic film 20 micron berkualitas tinggi.

Composite Alum menggunakan E Grade Glass ex USA, karena glass tersebut sangat sempurna menyerap polymer resin, sehingga atap tidak akan keropos, serabut dan memiliki kekuatan mekanis yang tinggi.

PRODUCT ADVANTAGES

	Strong & Durable The mechanical properties of Composite Alum is rigid and high flexure strength, safe to withstand life load and long-term use. Atap Composite Alum memiliki Sifat mekanik composite rigid dengan flexure strength yang tinggi, sehingga aman terhadap beban life load dan pemakaian jangka panjang.
	Low Maintenance & Simple Installation Composite Alum Roofing is fitted by common hand tools used in the installation of roofing, fast installation and low in maintenance. Atap Composite Alum dipasang dengan hand tools yang umum dipakai dalam pemasangan atap, cepat dalam pemasangan dan rendah dalam perawatan.
	Light Weight The specific gravity of Composite Alum more lower than metal roofing, product designed as light weight roof, friendly handling and will be as factory structure advantage design. Atap Composite Alum memiliki Berat jenis yang jauh lebih rendah dari material metal, sehingga beban design product ringan, mudah handlingnya, dan menguntungkan design struktur pabrik.
	Fast Delivery Composite Alum manufactured by an automatic and modern continuous laminating machine, high production capacity with the variety profile and customer design. Atap Composite Alum dibuat menggunakan mesin continuous laminating modern yang otomatis, kapasitas produksi tinggi dengan variasi profile standar dan sesuai pilihan customer.
	Noise Reduction Composite Alum is a noise reducing roof, make a comfort factory. Atap Composite Alum mampu mereduksi kebisingan sehingga ruangan pabrik menjadi jauh lebih nyaman.
	Corrosion Resistant Characteristic material of Composite Alum is excellent resistant to acid, alkali and environmental corrosion. Atap Composite Alum memiliki Sifat dan karakteristik material tidak korosif baik dari pengaruh acid dan alkali.
	Weather Resistant Composite Alum is composed by UV resistant material and surface protected by PE Plastic film laminating , Composite Alum will resist to climate change and UV radiation. Atap Composite Alum menggunakan komposisi material UV resistant dan dilindungi dengan lapisan PE Plastic Film anti UV tidak terpengaruh oleh perubahan cuaca yang ekstrem dan radiasi sinar UV.
	Environmental Friendly Composite Alum is free toxic and environmental friendly use. Atap Composite alum bersifat non toxic sehingga aman dan ramah lingkungan.
	Heat Reduction Composite Alum is an isolator, low heat transfer and no need isolation material protection. Atap Composite alum adalah bersifat isolator sehingga lambat meneruskan panas dan tidak diperlukan isolasi tambahan pada pemasangannya.

TECHNICAL DATA SHEET

Description	: The product shall be consist Fibreglass + Aluminium Filler
Matrix Resin	: Thermosetting resin type
Resin System	: Roofing resin grade & Chemical resistant grade
Profile	: Standard profile and by request
Thickness	: 1.5mm or 2.0mm
Color Grade	: Light Grey, Grass Green, Dark Blue, Mica Red
Sheet Length	: Available up to 12m

MATERIAL COMPOSITION

·         Thermosetting Resin

·         Glass Fibre

·         Aluminium Hydroxide

·         UV Stabilizer

·         PE Plastic Film

ADVANTAGES

  

·         Easy installation & low maintenance ·         Sound Reduction ·         Free of Asbestos ·         Light weight & strong durable

·         Non Corrosive ·         Chemical Resistant ·         Low thermal conductivity ·         Fire Reterdant

ADVANTAGES

PHYSICAL PROPERTIES

PROPERTIES	VALUE	TEST METHOD
Specific Gravity	1.53	D792
Thermal Expansion	1.15×10	D696
Water Absorbtion	0.06	D570
Sound Reduction	25	Manufacture Test
Thermal Conductivity	4.48	C177
Head Distortion Temperature	131	D648
Fire Retardent	Horizontal Burning (Min)	UL94HB

MECHANICAL PROPERTIES

PROPERTIES	VALUE	TEST METHOD
Barchol Hardeness	40	D2583
Glass Content	30	D25842
Tensile Strength	88	D638
Flextural Strength	102	D790
Flextural Modulus	7.87	D790
Compressive Strength	223.5	D695
Shear Strength	89.9	D732
Impact Resistance	10.1	D709

All above value base on Composite Alum test panel at Independent Testing Lab.

1: Max machine test capacity, theory up to 190 C

1: Internal Test with “Test box Machine”

2: Glass content test at 600-700C by oven within over than 4 hours

HANDLING

Layed at flat floor area

Covered by protection covering sheet

Keep the top surface from other material

SAFETY & ENVIRONMENT

No toxic effect

Free dust/gas toxic

STANDARD PROFILE

CA-SD700
TEBAL	INERTIA	ENDSPAN	MIDSPAN	CANTILEVERSPAN	BERAT
MM	Cm4	MM	MM	MM	KG/M2
1.5	13.52	1000	1200	150	3.2
2.0	18.1	1200	1500	300	4.3
3.0	27.3	1400	1700	400	6.5

*Life Load = 120 kg/m2

CA-TD760
TEBAL	INERTIA	ENDSPAN	MIDSPAN	CANTILEVERSPAN	BERAT
MM	Cm4	MM	MM	MM	KG/M2
1.5	17.26	1000	1100	150	3.0
2.0	23.13	1100	1300	250	4.0
3.0	35.1	1300	1600	300	6.0

*Life Load = 120 kg/m2

CA-SR1000
TEBAL	INERTIA	ENDSPAN	MIDSPAN	CANTILEVERSPAN	BERAT
MM	CM4	MM	MM	MM	KG/M2
1.5	34.94	1000	1100	150	3.0
2.0	46.81	1100	1300	250	4.0
3.0	70.96	1300	1700	300	6.0

*Life Load = 120 kg/m2

CA-LT7
TEBAL	INERTIA	ENDSPAN	MIDSPAN	CANTILEVERSPAN	BERAT
MM	Cm4	MM	MM	MM	KG/M2
1.5	41.15	1100	1250	150	3.4
2.0	55.07	1250	1600	300	4.5
3.0	83.24	1500	1800	400	6.8

*Life Load = 120 kg/m2

ROOF SLOPE TABLE

GELOMBANG	INTENSITAS HUJAN (mm/jam)	KEMIRINGAN ATAP
		20	30	7.50	100
		BENTANG ATAP (m)
CA-LT7	200	120	140	210	240
	250	95	110	168	194
	300	80	95	140	160
	400	60	70	105	121
CA-SR1000	200	98	115	170	195
	250	80	92	130	155
	300	65	75	110	130
	400	50	58	85	95
CA-SD700	150	NR	50	55	65
	200	NR	36	42	50
	250	NR	30	35	40
	300	NR	25	30	33
CA-TD760	150	80	110	150	175
	200	75	90	135	155
	250	60	70	105	125
	300	50	60	90	104

BUILDING PROFILE

CV. CIPTA PRIMA PERKASAPermata Candiloka Blok Y No. 3
Candi – Sidoarjo
Jawa Timur

Telp. :031-807-5779

Fax. :031-807.3203

HandPhone :

081249200002

HandPhone :0878.54000004

Pin BlacBerry :2A4F619E

Web :
www.ciptaprimaperkasa.com

E-Mail :
ciptaprimaperkasa@gmail.com

ATAP FIBREALUM

ATAP FIBREALUM | ATAP TRANSPARAN

ATAP TRANSPARAN FIBREALUM

Teknologi terbaru dari Jerman yang diterapkan pada Atap Transparan Fibrealum adalah pemakaian double layersr UV protection yang terdiri dari lapisan film plastik anti UV dan lapisan gelcoat anti UV yang membuat atap transparan fibrealum mampu bertahan lama untuk pemakaian atap/ dinding bangunan outdoor yang terkena UV matahari.

LAPISAN STRUKTUR ATAP TRANSPARAN FIBREALUM

ATAP TRANSPARAN FIBERALUM

KEUNGGULAN ATAP TRANSPARAN FIBREALUM

·        Tahan karat.

·        Tahan kimia dan tahan cuaca (UV matahari dan kelembaban).

·        Ringan, kuat, dan kaku.

·        Tidak mudah terbakar (ada zat fire retardant).

·        Isolator panas dan listrik.

·        Kebisingan rendah.

·        Waktu pengadaan singkat.

·        Pemasangan dan perawatan mudah.

·        Aman dan ramah lingkungan.

·        Garansi pemakaian 10 tahun (tebal 1,5 mm) dan 15 tahun (tebal 2,0 mm).

·        Tersedia berbagai pilihan macam profil dan warna.

 KARAKTERISTIK ATAP TRANSPARAN FIBERALUM

Characteristic	Value	Methods of Testing
Density (kg/m3)	1,51	ASTM D792-2000
Coefficient of thermal expansion (µm/ m 0C) a) α1 (-50 0C ÷ 0 0C) b) α2 (60 0C ÷ 110 0C)	81,5 483	ASTM E831-2000
Water absorption (%) a) weight gain (%) b) material dissolved (%)	0,41 0,37 0,04	ASTM D570-2005
Thermal conductivity (W/ m K)	0,158	ASTM C177-2004
Heat distortion temperature (0C)	> 260	ASTM D648-2007
Operating temperature (0C)	-20 ÷ 65
Glass fiber content (%)	30	ASTM D2584-2004
Fire  in the horizontal direction	CLASS HB	UL 94
Resistance to fire from outside	CLASS C	ASTM E108-2004

 

KARAKTERISTIK MEKANIK ATAP TRANSPARAN FIBREALUM

Characteristic	Value	Methods of Testing
Barcol hardness	> 50	ASTM D2583-2001
Impact strength (Izod) (J/m)	927	ASTM D256-2002
Shear strength (punch) (MPa)	52,3	ASTM D732-2002
Compressive strength (MPa)	135	ASTM D695-2004
Weather resistance (simulation testing in the laboratory)		ASTM G154-2006
Tensile strength (MPa) a) initial b) 1000 h accelerated weathering	113 ÷ 129 104 ÷ 128	ASTM D882-2002
Tensile modulus (MPa) a) initial b) 1000 h accelerated weathering	2271 ÷ 3059 2386 ÷ 2601	ASTM D882-2002
Flexural strength (MPa) a) initial b) 1000 h accelerated weathering	241 ÷ 245 210 ÷ 230	ASTM D790-2003
Flexural modulus (MPa) a) initial b) 1000 h accelerated weathering	6408 ÷ 6567 6611 ÷ 7547	ASTM D790-2003
Color measurement, DE a) 500 h accelerated weathering b) 1000 h accelerated weathering	12,3 ÷ 18,0 13,5 ÷ 19,8	ASTM E1348-2007

ATAP ALSYNYTE ULTRA COOL

ATAP ALSYNYTE ULTRA COOL | TRANSLUCENT ROOF

ALSYNITE ULTRA

Product Description

ALSYNITE ULTRA IS A PREMIUM QUALITY FIBRE REINFORCED POLYESTER (FRP) SHEET WITH EXCELLENT LONG TERM WEATHERING PROPERTIES. THE EXPOSED SURFACE FEATURES A NEW IMPROVED ULTRA VIOLET SURFACE PROTECTION FILM. TOGETHER WITH A UNIQUE POLYESTER RESIN FORMULATION, OUR ADVANCED SYSTEM IS PROUDLY BACKED BY A 25 YEARS PERFORMANCE WARRANTY. AVAILABLE IN A WIDE RANGE OF PROFILES, WEIGHTS AND COLOURS, ALSYNITE ULTRA IS THE PREMIUM CHOICE FOR ROOFING AND WALL CLADDING APPLICATIONS.

KEY FEATURES

·         EXCELLENT LONG TERM WEATHERING CHARACTERISTICS

·         SUPERIOR 25 YEARS WARRANTY *CONDITIONS APPLY

·         NON DELAMINATING SURFACE TECHNOLOGY

·         NON-AGED AND CRACKED SURFACE TECHNOLOGY

·         OUTSTANDING SURFACE EROSION RESISTANCE

·         RESISTANT TO COMMONPLACE CHEMICALS

·         SUPERIOR LONG TERM CLARITY PROPERTIES

TYPICAL APPLICATIONS

·         INDUSTRIAL AND COMMERCIAL SKYLIGHTS

·         BUILDING SKYLIGHT SIDINGS

·         NURSERY & RETAIL AREAS

·         CAR PORCH & PERGOLA COVERS

·         LIGHT DIFFUSERS

PRODUCT SPECIFICATIONS

PROFILES	DUE TO ALSYNITE’S GLOBAL PRESENCE, WE HAVE AN EXTENSIVE RANGE OF PROFILES WITHIN OUR PORTFOLIO THAT MATCHES MOST METAL SHEETING PROFILES.
SHEET LENGTH	STANDARD SHEET LENGTHS UP TO 11.9 METERS. OTHER NON-STANDARD   LENGTHS ARE AVAILABLE SUBJECT TO SPECIAL ORDER AND SHIPPING PARAMETERS.
WEIGHTS	·         1800 GSM ·         2400 GSM ·         3050 GSM ·         4880 GSM THE STANDARD WEIGHT FOR INDUSTRIAL APPLICATIONS IS 2400 GSM. FOR SHEET WEIGHTS NOT LISTED, PLEASE CONTACT YOUR NEAREST ALSYNITE DISTRIBUTOR FOR FURTHER DETAILS.
NOMINAL THICKNESS	1.2MM, 1.5MM, 2.0MM   ± 15%
SURFACE COATING	WORLD RENOWNED IMPROVED UV PROTECTION FILM. 20 MICRON NOMINAL THICKNESS.
COLORS	STANDARD COLORS OF CLEAR AND OPAL. CUSTOMIZED COLORS ARE AVAILABLE, SUBJECT TO MINIMUM ORDER QUANTITIES AND PIGMENT AVAILABILITY. THE COMBINATION OF COLOR AND WEIGHT WILL AFFECT THE AMOUNT OF LIGHT TRANSMITTED THROUGH THE SHEET.
RESIN SYSTEM	ADVANCED GENERAL PURPOSE GRADE ORTHOPHTHALIC POLYESTER.
REINFORCEMENT	“E” CLASS FIBRE OPTIC GLASS, AT LEAST 22%
LIGHT TRANSMISSION	CLEAR 74%, OPAL 58% (USING 2400 GSM 1.5MM SHEET)
THERMAL CONDUCTIVITY	CLEAR 72%, OPAL 62% (USING 2400 GSM 1.5MM SHEET)
HEAT DISTORTION TEMPERATURE	+180 TO 200
THERMAL EXPANSION	2.5 X 10-5 CM/CM/C
UV RESISTANCE	CLEAR 99.9%, OPAL 100%

MECHANICAL PROPERTIES

PROPERTIES	TENSILE STRENGTH	SHEAR STRENGTH
TEST VALUE	94MPA	90MPA
PROPERTIES	COMPRESSIVE STRENGTH	BARCOL HARDNESS
TEST VALUE	135MPA	> 50

PHYSICAL PROPERTIES

PROPERTIES	THERMAL EXPANSION (10-5CM/CM/°C)	WATER ABSORPTION (%)
TEST VALUE	2.2	0.52 TO 0.60
PROPERTIES	HEAT DISTORTION TEMPERATURE (°C)	OPERATING TEMPERATURES (°C)
TEST VALUE	+180 TO 200	-20 TO +95

SOLAR OPTICAL PROPERTIES

PROPERTIES	DIFFUSED LIGHT TRANSMISSION (%)	SOLAR HEAT GAIN (W/M2
CLEAR	74	560
OPAL	58	486
PROPERTIES	TRANSMITTANCE 380-320NM (UV – A)	TRANSMITTANCE 320-280NM (UV – B)
CLEAR	0.04	0.006
OPAL	–	–

RESULTS OF TESTS ARE BASED ON A 2400 GSM SHEET.

BROSUR ALSYNITE ULTRA ATAPTRANSLUCENT